This air deflector is an option for use on any 3M™ Headgear L-Series. In the standard configuration, the airflow is toward the inside of the faceshield lens. With the air deflector, the airflow is redirected towards the face of the user.

Used with the 3M™ Headgear L-Series. It is attached to the opening on the headgear. The lower end of the breathing tube is attached to the air control device.

This faceshield can be used with 3M™ Powered Air Purifying Respirator (PAPR) or Supplied Air Respirator Systems. It allows the user to wear prescription glasses for greater comfort and acceptance. It provides bumpcap protection.

This bumpcap is used with 3M™ Powered Air Purifying Respirator (PAPR) or Supplied Air Respirator Systems. It is available with an autodarkening lens and other options to enhance productivity and safety. It provides bumpcap protection.

This bumpcap is used with 3M™ Powered Air Purifying Respirator (PAPR) or Supplied Air Respirator Systems. It is available with an autodarkening lens for productivity and safety. It provides bumpcap protection.

Replacement part for the 3M™ Bumpcap L-500 Series. This shell is designed to be lightweight and offers no head protection against falling or moving objects.

Used on the 3M™ Headgear L-Series. The kit is used to attach 3M™ Faceshield Assemblies L-130, L-150, L-151, L-153, L-154, L-184 and L-185 to the headgear. This cam allows the faceshield to be positioned as desired.

Designed for use with 3M™ Bumpcap Headgear L-500 Series. It helps hold the headgear in place on the user. The chin strap is optional and is not required for safe use of this headgear.

Used with 3M™ Headgear L-700 and L-900 Series. It complies with ANSI requirements for impact and penetration protection. The chin strap helps hold the headgear in place on the user.

This cover plate, 4-1/2 inches x 5-1/4 inches, is part of the lens stack. It is placed between the lens gasket and the film gasket on the welding lens stack. On the electronic lens stack, it is placed between the lens gasket and the lens.

This lens and adapter is used on the 3M™ L-Series Welding Headgear.

Used on 3M™ Headgear L-500 and L-700 Series. This item is used in applications with high temperatures or when sparks or molten metal may be present.

Used on 3M™ Bumpcap L-501/37008(AAD). This faceseal material is designed for applications such as spray painting. It attaches to the extender on the wide view faceshield.

Used with 3M™ Headgear L-500 and L-700 Series. This faceseal material is designed for applications with high temperature or where sparks or molten metal may be present.

This gasket, 4 1/2 inches x 5 1/4 inches is part of the welding lens stack. It is placed between the cover plate and the glass shade lens to prevent glass breakage due to heat buildup. The gasket is not used with the electronic lens.

This adapter determines airflow for the 3M™ Headgear L-Series and the GVP Series Powered Air Purifying Respirator (PAPR)s.

Used on the 3M™ L-Series Headgear L-700 and L-900. It is installed into the headgear shell before the head suspension is installed. With this foam liner, the headgear is ANSI Class I, II approved for top and side impact.

Used on 3M™ Headgear L-Series. It holds the head pad securely and is attached to the headband which is part of the 3M™ Head Suspension Assembly L-113.

This hardhat is used with 3M™ Powered Air Purifying Respirator (PAPR) or Supplied Air Respirator Systems. It can be used in applications where ANSI Type I, II hardhat protection is needed. It has an assigned protection factor of 25 x PEL.

This hardhat can be used with 3M™ Powered Air Purifying Respirator (PAPR) or Supplied Air Respirator Systems. It is designed for welding operations which must have industrial protective headgear. It has an assigned protection factor of 25 x PEL.

This hardhat can be used with 3M™ Powered Air Purifying Respirator (PAPR) or Supplied Air Respirator Systems. Meets ANSI Type I, II requirements for industrial protective headgear. It has an assigned protection factor of 25 x PEL.

Replacement part for the 3M™ Hardhat L-700 Series. The shell meets ANSI requirements for industrial protective headgear. The shell is intended to be used in applications in which some head protection is required.

Can be used with any 3M™ Headgear L-Series. It protects against the buildup of particles on the outside surface of the headgear shell. This is a disposable item and should be discarded when damaged or soiled.

Used on 3M™ Headgear L-Series. The head pad is part of the 3M™ Head Suspension and is attached to the hanger suspension. The pad adds to user comfort.

Used on the 3M™ L-Series Bumpcap L-500. It is used to help prevent leaks around the headgear. The seals are installed into the bottom edge of the headgear and should not be removed unless they need to be replaced.

Designed for use with 3M™ L-Series Headgear. The complete assembly includes the chin strap L-112 (optional), sweat pad L-115-10/37010(AAD), head pad L-116, hanger suspension L-117 and headband.

This helmet can be used with 3M™ Powered Air Purifying Respirator (PAPR) or Supplied Air Respirator Systems. It meets ANSI Type I, II hardhat requirements. It has shroud options and provides an assigned protection factor of 1000 x PEL.

This helmet can be used with 3M™ Powered Air Purifying Respirator (PAPR) or Supplied Air Respirator Systems. It meets ANSI Type1, II hardhat requirements. It has shroud options and provides protection up to 1000 x PEL.

Designed for use with 3M™ Helmet L-900 Series. This shell meets both ANSI and CSA Class G standards for industrial headgear protection. This shell is for use in applications in which top and side impact may occur.

This shield, 4 1/2 inches x 5 1/4 inches, can be used with 3M™ Headgear L-505, L-705 and L-905. It is used to improve protection against radiated high temperatures of welding operations.

Used with the 3M™ Headgear L-900 Series. It is zipped onto the inner part of the 3M™ Leather Welding Shroud L-127. It can be zipped out for washing.

Used on 3M™ Wide View Faceshield L-130. The kit includes the knob and the pivot post on which the faceshield pivots when raised, lowered and repositioned.

Used on the 3M™ Wide View Faceshield L-130. The faceshield attaches to the headgear using the postioning cam mechanism that is secured by the knob to each side of the headgear.

Used to hold the 3M™ Wide View Lens L-131 and L-132 in place in the 3M™ Wide View Faceshield Assembly L-130. The latch kit makes it easy to remove and replace the wide view lens.

Used with the 3M™ Wide View Lens. The cover fits over the lens and protects it from scratching or overspray of paint and chemicals. Up to five covers can be attached, one on top of the other.

Used with the 3M™ Wide View Lens. The cover fits over the lens and protects it from scratching or overspray of paint and chemicals. Up to five covers can be attached, one on top of the other.

This safety plate, 4-1/2 inches x 5-1/4 inches, is used in the welding lens stacks that use shade glass. It is placed on the outside nearest the wire clip that securely holds all parts of the stack in place. The plate is ANSI approved.

Used with the 3M™ Headgear L-900 Series. This shroud is not intended for welding applications or where high heat or sparks are expected. It drapes over the worker for safety purposes.

Used with the 3M™ Headgear L-900 Series. This shroud is designed for welding applications or where high heat or sparks are expected. It drapes over the worker for safety purposes.

Used with the 3M™ Headgear L-900 Series. This shroud may be used in place of the 3M™ Shroud L-123-2, Tychem® QC. It drapes over the worker for safety purposes.

Used on the 3M™ L-Series Headgear, H-Series Hood, Whitecap™ Helmets and Hardcap Assembly. The sweat pad attaches to the headband in the area of the users forehead. It helps absorb perspiration and adds to the overall comfort of the user.

Used with the 3M™ Headgear L-Series (except the L-900 Series Headgear). It is attached to the headgear by two matching 3M™ Scotchmate™ Hook-and-Loop Fasteners and drapes over the worker for safety purposes.

This gasket, 4 1/2 inches x 5 1/4 inches, is a component of the welding lens stack. It fits into the lens frame and the other parts of the stack fit over the gasket.

Used on the 3M™ Welding Faceshield and Combination Faceshield. The kit includes the 3M™ Welding Knob L-145 and the pivot post on which the faceshield pivots when raised, lowered and repositioned.

Used on the 3M™ Welding Shields L-150 and L-151 and also in the 3M™ Combination Faceshields L-153, L-154, L-184 and L-185. This knob secures the cam mechanism which is attached to the headgear.

Used to hold all components of the lens stack securely in place. The retainer pivots at one end and can be lifted to replace parts. When closed it fits into slots on the lens frame.

This shield, 4-1/2 inches x 5-1/4 inches, is designed for use with the 3M™ Bumpcap L-503 and Hardhat L-703. It attaches to the headgear with a positioning cam that is secured by a spring-loaded knob on each side of the headgear.

This welding shield, 4 1/2 inches x 5 1/4 inches, is designed for use with the 3M™ Bumpcap L-505, Hardhat L-705 and Helmet L-905. It attaches to the headgear with a positioning cam that is secured by a spring-loaded knob on each side of the headgear.

Used with the 3M™ Headgear L-900 Series. This heavy duty shroud is intended for use in welding applications or where high heat or sparks are expected. It drapes over the worker for safety purposes.

Used with the 3M™ L-Series Headgear. It is a general purpose faceshield which should not, by itself, be used for welding applications. It attaches to the headgear using a positioning cam mechanism.

Attaches to the 3M™ Wide-view Faceshield Assembly L-130. The 3M™ Faceseal L-121 attaches to the extender for spray painting or where there is general particulate exposure.

Used on the 3M™ Headgear L-Series. This lens is part of the 3M™ Wide-view Faceshield Assembly L-130. It can easily be removed and replaced with a new lens when damaged.

Used on the 3M™ Headgear L-Series. This lens is part of the 3M™ Wide-view Faceshield Assembly L-130. It can easily be removed and replaced with a new lens when damaged.