BEST ADHESIVE FOR LSE PLASTICS. This is a solvent free adhesive which provides a much higher peel strength than 300MP adhesive to low surface energy plastics such as polypropylene and polyethylene.
Additional Information
Very good chemical, humidity and exceptional temperature resistance, and is the best choice for bonding to plastic substrates, oily metal and powder paints.
2.0 mil, 300LSE high strength acrylic adhesive, double linered with 4.0 mil, 58 lb and 6.5 mil, 86 lb polycoated kraft. Double linered version of 3M™ Adhesive Transfer Tape 9471LE for selective die-cutting and applications to smooth surfaces.
3.5 mil, 300LSE high strength acrylic adhesive with double liner of 4.0 mil, 58 lb and 6.5 mil, 86 lb polycoated kraft paper. Moisture and tear resistant. Use for steel rule die cutting and kiss cutting. Thicker version of 8132LE for rough surfaces.
2.0 mil, high strength 300LSE adhesive with 4.0 mil, 58 lb polycoated kraft paper liner. Bonds plastics, graphics to powder coatings, LSE material and oily metal. High temperature holding, high moisture and solvent resistance.
5.0 mil, high strength 300LSE adhesive with 4.0 mil, 58 lb polycoated kraft paper liner. bonds plastics, graphics to powder coatings, LSE material and oily metal. High temperature holding, high moisture and solvent resistance.
3.5 mil, 300LSE high strength acrylic adhesive with 6.5 mil, 86 lb polycoated kraft paper liner. Moisture and tear resistant. Use for steel rule die cutting and kiss cutting.
2.0 mil, 300LSE high strength acrylic adhesive with 6.5 mil, 86 lb polycoated kraft liner. Moisture and tear resistant lay-flat liner. Use for steel rule die cutting and kiss cutting.
5.0 mil, 300LSE high strength acrylic adhesive with 6.5 mil, 86 lb polycoated kraft paper liner. Moisture and tear resistant. Use for steel rule die cutting and kiss cutting. For textured plastic surfaces.
Printer-friendly format