|
|
[click to enlarge]
|
|
Choose from a wide selection of different 3M™ IDCs to meet a variety of uses; including fluorescent ballast installation and replacement, fixture and appliance wiring, automotive and marine wiring, and control circuit wiring.
|
|
|
|
Additional Information
Each new model incorporates a full wire range capability, an increased port size that accommodates up to 0.155 inch (4,0 millimeter) insulation sizes, double "U" inch elements and a solvent-resistant plastic construction.
|
|
Make a Selection |
|
|
3M™ Scotchlok™ 314 Electrical IDC, Pigtail, Moisture Resistant
Used to electrically connect two or three wire ends and insulate the connection. Flame retardant, moisture resistant and has an AWG range 22-14 (0,5-1,5).
|
|
|
3M™ Scotchlok™ 314U Electrical IDC, Pigtail
Used to electrically connect two or three wire ends and insulate the connection. Flame retardant and has an AWG range 22-14 (0,5-1,5).
|
|
|
3M™ Scotchlok™ 316IR Electrical IDC, Pigtail, Irrigation Applications
Electrically connects two or three wire ends, insulates the connection, provides a moisture resistant seal and has an AWG range 22-16 (0,5-1,5). Recommended for use with low energy underground circuit wires.
|
|
|
3M™ Scotchlok™ 557 Electrical IDC, Pigtail
Designed for control circuit wiring, fixture wiring, appliance wiring, signal and PA systems, and automotive/boat/RV wiring. Provides a dual element connection and has an AWG range 22-16 (0,5-1,5).
|
|
|
3M™ Scotchlok™ 558 Electrical IDC, Run and Tap, Flame Retardant
Electrically connects a (tap) wire end to a through (run) wire and insulates the connection. Designed for control circuit wiring, fixture wiring, appliance wiring, signal and PA systems, automotive/boat/RV wiring. It has an AWG range 22-16 (0,5-1,5).
|
|
|
3M™ Scotchlok™ 560 Electrical IDC, Double Run or Tap, Flame Retardant
3M™ Scotchlok™ 560 Electrical IDC Double Run or Tap is flame retardant and electrically connects a (tap) wire end to a through (run) wire and insulates the connection. It has an AWG range of 18-16 (0,75-1,5) solid/stranded, 14 (1,5) stranded.
|
|
|
3M™ Scotchlok™ 560B Electrical IDC, Double Run or Tap
The 3M™ Scotchlok™ 560B IDC Electrical Tap Connector is used for run and tap splicing and has an AWG range AWG range of 18-16 (0,75-1,5) Solid/Stranded, 14 (1,5) Stranded.
|
|
|
3M™ Scotchlok™ 560N Electrical IDC, Double Run, Flame Retardant
3M™ Scotchlok™ 560N Electrical IDC, Doube Run is used for double run taps. It is flame retardant and has an AWG range of 18-16 (0,75-1,5) solid/stranded, 14 (1,5) stranded.
|
|
|
3M™ Scotchlok™ 562 Electrical IDC, Double Run or Tap, Flame Retardant
3M™ Scotchlok™ 562 Electrical IDC Double Run or Tap electrically connects a (tap) wire end through a (run) wire and insulates the connection. It has an AWG range of 12 (3,0) solid/stranded, 10 (4,0) stranded.
|
|
|
3M™ Scotchlok™ 564 Electrical IDC, Double Run
Used for parallel splicing in dry environment applications. AWG range of 18-14 (0,75-1,5).
|
|
|
3M™ Scotchlok™ 567 Electrical IDC, Run and Tap
The 3M™ Scotchlok™ 567 Electrical IDC provides a dual element connection. AWG range of 18-14 (0,75-1,5) tap, 12-10 (3,0-4,0) run.
|
|
|
3M™ Scotchlok™ 804 Electrical IDC, Run and Tap, Moisture Resistant
Sealant-filled connector is suitable for RV trailers, boats, fleet vehicles and other environmentally sensitive applications where corrosive elements such as road chemicals, salt spray and exhaust fumes might be encountered.
|
|
|
3M™ Scotchlok™ 901 Electrical IDC, In-Line Bullet Receptacle
Designed for quick connect/disconnect of electrical systems on pull-behind vehicles such as rental trailers, boats and campers. Used as a tap splicing disconnect. AWG range 18-14 (0,75-1,5).
|
|
|
3M™ Scotchlok™ 905 Electrical IDC, Double Run or Tap, Low Voltage (Automotive) Applications
Electrically connects a (tap) wire end to a through (run) wire and insulates the connection. Suitable for low-voltage accessories such as radios, stereo speakers, tape decks and CB radios. AWG range 22-18 (0,5-1,0) tap, 18-14 (0,75-1,5) run).
|
|
|
3M™ Scotchlok™ 905N Electrical IDC, Double Run, Low Voltage (Automotive) Applications
3M™ Scotchlok™ 905N Self-Stripping Electrical Connector is used for low voltage (automotive) and has an AWG range 22-18 (0,5-1,0) Tap, 18-14 (0,75-1,5) Run.
|
|
|
3M™ Scotchlok™ 951 Electrical IDC, Female T-Tap Quick Slide
3M™ Scotchlok™ 951 Female T-Tap Quick Slide Connector is a T-tap disconnect and has an AWG range 22-18 (0,5-1,0).
|
|
|
3M™ Scotchlok™ 952 Electrical IDC, Female T-Tap Quick Slide
3M™ Scotchlok™ 952 Female T-Tap Quick Slide Connector is a T-tap disconnect and has an AWG range 18-14 (0,75-1,5).
|
|
|
3M™ Scotchlok™ 953 Electrical IDC, Female T-Tap Quick Slide
3M™ Scotchlok™ 953 Female T-Tap Quick Slide Connector is a T-tap disconnect and has an AWG range 12 (3,0).
|
|
|
3M™ Scotchlok™ 972 Electrical IDC, In-Line Blade Type Fuseholder, Automotive Applications
3M™ Scotchlok™ 972 Self-Stripping In-Line Blade Type Fuseholder is an auto fuse holder and has an AWG range 18-14 (0,75-1,5).
|
|
|
3M™ Scotchlok™ Electrical IDC 801, In-Line Bullet Receptacle
801 SCOTCHLOK BULK 5000/CTN
|
|
|
3M™ Scotchlok™ Electrical IDC 801
Make inline, pigtail and tap splices on 14 gauge solid or stranded wire. No wire stripping needed.
|
|
|
3M™ Scotchlok™ Electrical IDC 902, 50 per box
50 per box
|
|
|
3M™ Scotchlok™ Electrical IDC 902, 1000 per case
902 SCOTCHLOK BULK 1000/CTN
|
|
|
Scotchlok™ Electrical IDC 903, 50 per box
Make inline, pigtail and tap splices on 12-10 AWG solid or stranded wire. Automotive, truck, boat and trailer wiring jobs are easier and faster with a pair of pliers. 50 per box. UL Listed.
|
|
|
Scotchlok™ Electrical IDC 903, 1000 bulk
Make inline, pigtail and tap splices on 12-10 AWG solid or stranded wire. Automotive, truck, boat and trailer wiring jobs are easier and faster with a pair of pliers. UL Listed.
|
|
Printer-friendly format
