|
|
 Make a Selection |
|
|
3M™ 4-Wall Header .100 in., High Temp Option, Right Angle, 34 Contacts, 3431-50K2
.100" x .100" Latch/Ejector, Standard, 4 wall right angle solder tail, No Latch/Ejector system, Kinked solder tails for .062[1.57] thick board, 30µ" gold plating.
|
|
|
3M™ 4-Wall Header .100 in., High Temp Option, Right Angle, 34 Contacts, 3431-5002
.100" x .100" Latch/Ejector, Standard, 4 wall right angle solder tail, No Latch/Ejector system, Solder tails for .062[1.57] thick board 30µ" gold plating.
|
|
|
3M™ 4-Wall Header .100 in., High Temp Option, Right Angle, 34 Contacts, 3431-5002UG
.100" x .100" Latch/Ejector, Standard, 4 wall right angle solder tail, No Latch/Ejector system, Solder tails for .062[1.57] thick board 15µ" gold plating.
|
|
|
3M™ 4-Wall Header .100 in., High Temp Option, Right Angle, 34 Contacts, 3431-5003
.100" x .100" Latch/Ejector, Standard, 4 wall right angle solder tail, No Latch/Ejector system, Solder tails for .094 to .125[2.39 to 3.18] thick board, 30µ" gold plating.
|
|
|
3M™ 4-Wall Header .100 in., High Temp Option, Right Angle, 34 Contacts, 3431-5003UG
.100" x .100" Latch/Ejector, Standard, 4 wall right angle solder tail, No Latch/Ejector system, Solder tails for .094 to .125[2.39 to 3.18] thick board, 15µ" gold plating.
|
|
|
3M™ 4-Wall Header .100 in., High Temp Option, Right Angle, 34 Contacts, 3431-5005
.100" x .100" Latch/Ejector, .240" Pin, .61" Wire-Wrap Tails, 15μ" Gold Plating
|
|
|
3M™ 4-Wall Header .100 in., High Temp Option, Right Angle, 34 Contacts, 3431-5005
.100" x .100" Latch/Ejector, Standard, 4 wall right angle solder tail, No Latch/Ejector system, Wrap posts up to 3 levels of wire wrap (normal temp only), 30µ" gold plating.
|
|
|
3M™ 4-Wall Header .100 in., High Temp Option, Right Angle, 34 Contacts, 3431-5402
.100" x .100" Latch/Ejector, Standard, 4 wall right angle solder tail, Roll Pin Ejectors (3M Part#3505-4), Solder tails for .062[1.57] thick board 30µ" gold plating.
|
|
|
3M™ 4-Wall Header .100 in., High Temp Option, Right Angle, 34 Contacts, 3431-5403
.100" x .100" Latch/Ejector, Standard, 4 wall right angle solder tail, Roll Pin Ejectors (3M Part#3505-4), Solder tails for .094 to .125[2.39 to 3.18] thick board, 30µ" gold plating.
|
|
|
3M™ 4-Wall Header .100 in., High Temp Option, Right Angle, 34 Contacts, 3431-5405
.100" x .100" Latch/Ejector, Standard, 4 wall right angle solder tail, Roll Pin Ejectors (3M Part#3505-4), Wrap posts up to 3 levels of wire wrap (normal temp only), 30µ" gold plating.
|
|
|
3M™ 4-Wall Header .100 in., High Temp Option, Right Angle, 34 Contacts, 3431-5502
.100" x .100" Latch/Ejector, , 4 wall right angle solder tail, Short Snap-In Latch/Ejectors (3M Part#3505-30), Solder tails for .062[1.57] thick board 30µ" gold plating.
|
|
|
3M™ 4-Wall Header .100 in., High Temp Option, Right Angle, 34 Contacts, 3431-5502UG
.100" x .100" Latch/Ejector, Standard, 4 wall right angle solder tail, Short Snap-In Latch/Ejectors (3M Part#3505-30), Solder tails for .062[1.57] thick board 15µ" gold plating.
|
|
|
3M™ 4-Wall Header .100 in., High Temp Option, Right Angle, 34 Contacts, 3431-5503
.100" x .100" Latch/Ejector, Standard, 4 wall right angle solder tail, Short Snap-In Latch/Ejectors (3M Part#3505-30), Solder tails for .094 to .125[2.39 to 3.18] thick board, 30µ" gold plating.
|
|
|
3M™ 4-Wall Header .100 in., High Temp Option, Right Angle, 34 Contacts, 3431-5503
.100" x .100" Latch/Ejector, Snap-in Short Latch/Ejectors, .240" Pin, .155" Solder Tails, 30μ" Gold Plating
|
|
|
3M™ 4-Wall Header .100 in., High Temp Option, Right Angle, 34 Contacts, 3431-5503UG
.100" x .100" Latch/Ejector, Standard, 4 wall right angle solder tail, Short Snap-In Latch/Ejectors (3M Part#3505-30), Solder tails for .094 to .125[2.39 to 3.18] thick board, 15µ" gold plating.
|
|
|
3M™ 4-Wall Header .100 in., High Temp Option, Right Angle, 34 Contacts, 3431-5602
.100" x .100" Latch/Ejector, Standard, 4 wall right angle solder tail, Long Snap-In Latch/Ejectors (3M Part#3505-31) Solder tails for .062[1.57] thick board 30µ" gold plating.
|
|
|
3M™ 4-Wall Header .100 in., High Temp Option, Right Angle, 34 Contacts, 3431-5602UG
.100" x .100" Latch/Ejector, Standard, 4 wall right angle solder tail, Long Snap-In Latch/Ejectors (3M Part#3505-31) Solder tails for .062[1.57] thick board 15µ" gold plating.
|
|
|
3M™ 4-Wall Header .100 in., High Temp Option, Right Angle, 34 Contacts, 3431-5603
.100" x .100" Latch/Ejector, Standard, 4 wall right angle solder tail, Long Snap-In Latch/Ejectors (3M Part#3505-31) Solder tails for .094 to .125[2.39 to 3.18] thick board, 30µ" gold plating.
|
|
|
3M™ 4-Wall Header .100 in., High Temp Option, Right Angle, 34 Contacts, 3431-5603UG
.100" x .100" Latch/Ejector, Standard, 4 wall right angle solder tail, Long Snap-In Latch/Ejectors (3M Part#3505-31) Solder tails for .094 to .125[2.39 to 3.18] thick board, 15µ" gold plating.
|
|
|
3M™ 4-Wall Header .100 in., High Temp Option, Right Angle, 34 Contacts, N3431-5002
.100" x .100" Latch/Ejector, High temperature, 4 wall right angle solder tail, No Latch/Ejector system, Solder tails for .062[1.57] thick board 30µ" gold plating.
|
|
|
3M™ 4-Wall Header .100 in., High Temp Option, Right Angle, 34 Contacts, N3431-5002UG
.100" x .100" Latch/Ejector, High temperature, 4 wall right angle solder tail, No Latch/Ejector system, Solder tails for .062[1.57] thick board 15µ" gold plating.
|
|
|
3M™ 4-Wall Header .100 in., High Temp Option, Right Angle, 34 Contacts, N3431-5502
.100" x .100" Latch/Ejector, High temperature, 4 wall right angle solder tail, Short Snap-In Latch/Ejectors (3M Part#3505-30), Solder tails for .062[1.57] thick board 30µ" gold plating.
|
|
|
3M™ 4-Wall Header .100 in., High Temp Option, Right Angle, 34 Contacts, N3431-5502UG
.100" x .100" Latch/Ejector, High temperature, 4 wall right angle solder tail, Short Snap-In Latch/Ejectors (3M Part#3505-30), Solder tails for .062[1.57] thick board 15µ" gold plating.
|
|
|
3M™ 4-Wall Header .100 in., High Temp Option, Right Angle, 34 Contacts, N3431-5503
.100" x .100" Latch/Ejector, High temperature, 4 wall right angle solder tail, Short Snap-In Latch/Ejectors (3M Part#3505-30), Solder tails for .094 to .125[2.39 to 3.18] thick board, 30µ" gold plating.
|
|
|
3M™ 4-Wall Header .100 in., High Temp Option, Right Angle, 34 Contacts, N3431-5602
.100" x .100" Latch/Ejector, High temperature, 4 wall right angle solder tail, Long Snap-In Latch/Ejectors (3M Part#3505-31) Solder tails for .062[1.57] thick board 30µ" gold plating.
|
|
|
3M™ 4-Wall Header .100 in., High Temp Option, Straight, 34 Contacts, 3431-6002
.100" x .100" Latch/Ejector, Standard, 4 wall straight solder tail, No Latch/Ejector system, Solder tails for .062[1.57] thick board 30µ" gold plating.
|
|
|
3M™ 4-Wall Header .100 in., High Temp Option, Straight, 34 Contacts, 3431-6002UG
.100" x .100" Latch/Ejector, Standard, 4 wall straight solder tail, No Latch/Ejector system, Solder tails for .062[1.57] thick board 15µ" gold plating.
|
|
|
3M™ 4-Wall Header .100 in., High Temp Option, Straight, 34 Contacts, 3431-6003
.100" x .100" Latch/Ejector, Standard, 4 wall straight solder tail, No Latch/Ejector system, Solder tails for .094 to .125[2.39 to 3.18] thick board, 30µ" gold plating.
|
|
|
3M™ 4-Wall Header .100 in., High Temp Option, Straight, 34 Contacts, 3431-6005
.100" x .100" Latch/Ejector, .240" Pin, .61" Wire-Wrap Tails, 30μ" Gold Plating
|
|
|
3M™ 4-Wall Header .100 in., High Temp Option, Straight, 34 Contacts, 3431-6022
.100" x .100" Latch/Ejector, .240" Pin, 3518 Polarizing Keys Attached, .112" Solder Tails, 30μ" Gold Plating
|
|
|
3M™ 4-Wall Header .100 in., High Temp Option, Straight, 34 Contacts, 3431-6402
.100" x .100" Latch/Ejector, Standard, 4 wall straight solder tail, Roll Pin Ejectors (3M Part#3505-4), Solder tails for .062[1.57] thick board 30µ" gold plating.
|
|
|
3M™ 4-Wall Header .100 in., High Temp Option, Straight, 34 Contacts, 3431-6405
.100" x .100" Latch/Ejector, .240" Pin, .61" Wire-Wrap Tails, 30μ" Gold Plating
|
|
|
3M™ 4-Wall Header .100 in., High Temp Option, Straight, 34 Contacts, 3431-6405
.100" x .100" Latch/Ejector, Standard, 4 wall straight solder tail, Roll Pin Ejectors (3M Part#3505-4), Wrap posts up to 3 levels of wire wrap (normal temp only), 30µ" gold plating.
|
|
|
3M™ 4-Wall Header .100 in., High Temp Option, Straight, 34 Contacts, 3431-6502
.100" x .100" Latch/Ejector, Standard, 4 wall straight solder tail, Short Snap-In Latch/Ejectors (3M Part#3505-30), Solder tails for .062[1.57] thick board 30µ" gold plating.
|
|
|
3M™ 4-Wall Header .100 in., High Temp Option, Straight, 34 Contacts, 3431-6502UG
.100" x .100" Latch/Ejector, Standard, 4 wall straight solder tail, Short Snap-In Latch/Ejectors (3M Part#3505-30), Solder tails for .062[1.57] thick board 15µ" gold plating.
|
|
|
3M™ 4-Wall Header .100 in., High Temp Option, Straight, 34 Contacts, 3431-6503
.100" x .100" Latch/Ejector, Standard, 4 wall straight solder tail, Short Snap-In Latch/Ejectors (3M Part#3505-30), Solder tails for .094 to .125[2.39 to 3.18] thick board, 30µ" gold plating.
|
|
|
3M™ 4-Wall Header .100 in., High Temp Option, Straight, 34 Contacts, 3431-6602
.100" x .100" Latch/Ejector, Standard, 4 wall straight solder tail, Long Snap-In Latch/Ejectors (3M Part#3505-31) Solder tails for .062[1.57] thick board 30µ" gold plating.
|
|
|
3M™ 4-Wall Header .100 in., High Temp Option, Straight, 34 Contacts, 3431-6602UG
.100" x .100" Latch/Ejector, Standard, 4 wall straight solder tail, Long Snap-In Latch/Ejectors (3M Part#3505-31) Solder tails for .062[1.57] thick board 15µ" gold plating.
|
|
|
3M™ 4-Wall Header .100 in., High Temp Option, Straight, 34 Contacts, 3431-6603
.100" x .100" Latch/Ejector, Standard, 4 wall straight solder tail, Long Snap-In Latch/Ejectors (3M Part#3505-31) Solder tails for .094 to .125[2.39 to 3.18] thick board, 30µ" gold plating.
|
|
|
3M™ 4-Wall Header .100 in., High Temp Option, Straight, 34 Contacts, 3431-6603UG
.100" x .100" Latch/Ejector, Standard, 4 wall straight solder tail, Long Snap-In Latch/Ejectors (3M Part#3505-31) Solder tails for .094 to .125[2.39 to 3.18] thick board, 15µ" gold plating.
|
|
|
3M™ 4-Wall Header .100 in., High Temp Option, Straight, 34 Contacts, N3431-6002
.100" x .100" Latch/Ejector High temperature, 4 wall straight solder tail, No Latch/Ejector system, Solder tails for .062[1.57] thick board 30µ" gold plating.
|
|
|
3M™ 4-Wall Header .100 in., High Temp Option, Straight, 34 Contacts, N3431-6002UG
.100" x .100" Latch/Ejector, High temperature, 4 wall straight solder tail, No Latch/Ejector system, Solder tails for .062[1.57] thick board 15µ" gold plating.
|
|
|
3M™ 4-Wall Header .100 in., High Temp Option, Straight, 34 Contacts, N3431-6502
.100" x .100" Latch/Ejector, High temperature, 4 wall straight solder tail, Short Snap-In Latch/Ejectors (3M Part#3505-30), Solder tails for .062[1.57] thick board 30µ" gold plating.
|
|
|
3M™ Four-Wall Header, 3000 Series, N3431-5603
.100” × .100” Latch/Ejector, Straight and Right Angle
|
|
Printer-friendly format
