|
|
 Make a Selection |
|
|
3M™ 4-Wall Header .100 in., High Temp Option, Right Angle, 64 Contacts, N3764-5603
.100" x .100" Latch/Ejector High temperature, 4 wall right angle solder tail, Long Snap-In Latch/Ejectors (3M Part#3505-31) Solder tails for .094 to .125 [2.39 to 3.18] thick board, 30µ" gold plating.
|
|
|
3M™ 4-Wall Header .100 in., 3000 series, 3764-6502
.100” × .100” Latch/Ejector, Straight and Right Angle
|
|
|
3M™ 4-Wall Header .100 in., High Temp Option, Right Angle, 64 Contacts, 3764-5002UG
.100" x .100" Latch/Ejector, Standard, 4 wall right angle solder tail, No Latch/Ejector system, Solder tails for .062 [1.57] thick board, 15µ" gold plating.
|
|
|
3M™ 4-Wall Header .100 in., High Temp Option, Right Angle, 64 Contacts, 3764-5003
.100" x .100" Latch/Ejector Standard, 4 wall right angle solder tail, No Latch/Ejector system, Solder tails for .094 to .125 [2.39 to 3.18] thick board, 30µ" gold plating.
|
|
|
3M™ 4-Wall Header .100 in., High Temp Option, Right Angle, 64 Contacts, 3764-5005
.100" x .100" Latch/Ejector, .240" Pin, .61" Wire-Wrap Tails, 15μ" Gold Plating
|
|
|
3M™ 4-Wall Header .100 in., High Temp Option, Right Angle, 64 Contacts, 3764-5005
.100" x .100" Latch/Ejector, Standard, 4 wall right angle solder tail, No Latch/Ejector system, Wrap posts up to 3 levels of wire wrap (normal temp only), 30µ" gold plating.
|
|
|
3M™ 4-Wall Header .100 in., High Temp Option, Right Angle, 64 Contacts, 3764-5402
.100" x .100" Latch/Ejector, Standard, 4 wall right angle solder tail, Roll Pin Ejectors (3M Part#3505-4), Solder tails for .062 [1.57] thick board, 30µ" gold plating.
|
|
|
3M™ 4-Wall Header .100 in., High Temp Option, Right Angle, 64 Contacts, 3764-5403
.100" x .100" Latch/Ejector, Standard, 4 wall right angle solder tail, Roll Pin Ejectors (3M Part#3505-4), Solder tails for .094 to .125 [2.39 to 3.18] thick board, 30µ" gold plating.
|
|
|
3M™ 4-Wall Header .100 in., High Temp Option, Right Angle, 64 Contacts, 3764-5405
.100" x .100" Latch/Ejector, Standard, 4 wall right angle solder tail, Roll Pin Ejectors (3M Part#3505-4), Wrap posts up to 3 levels of wire wrap (normal temp only), 30µ" gold plating.
|
|
|
3M™ 4-Wall Header .100 in., High Temp Option, Right Angle, 64 Contacts, 3764-5502
.100" x .100" Latch/Ejector, Standard, 4 wall right angle solder tail, Short Snap-In Latch/Ejectors (3M Part#3505-30), Solder tails for .062 [1.57] thick board, 30µ" gold plating.
|
|
|
3M™ 4-Wall Header .100 in., High Temp Option, Right Angle, 64 Contacts, 3764-5502UG
.100" x .100" Latch/Ejector, Standard, 4 wall right angle solder tail, Short Snap-In Latch/Ejectors (3M Part#3505-30), Solder tails for .062 [1.57] thick board, 15µ" gold plating.
|
|
|
3M™ 4-Wall Header .100 in., High Temp Option, Right Angle, 64 Contacts, 3764-5503
.100" x .100" Latch/Ejector, Standard, 4 wall right angle solder tail, Short Snap-In Latch/Ejectors (3M Part#3505-30), Solder tails for .094 to .125 [2.39 to 3.18] thick board, 30µ" gold plating.
|
|
|
3M™ 4-Wall Header .100 in., High Temp Option, Right Angle, 64 Contacts, 3764-5503UG
.100" x .100" Latch/Ejector, , 4 wall right angle solder tail, Short Snap-In Latch/Ejectors (3M Part#3505-30), Solder tails for .094 to .125 [2.39 to 3.18] thick board, 15µ" gold plating.
|
|
|
3M™ 4-Wall Header .100 in., High Temp Option, Right Angle, 64 Contacts, 3764-5602
.100" x .100" Latch/Ejector, Standard, 4 wall right angle solder tail, Long Snap-In Latch/Ejectors (3M Part#3505-31) Solder tails for .062 [1.57] thick board, 30µ" gold plating.
|
|
|
3M™ 4-Wall Header .100 in., High Temp Option, Right Angle, 64 Contacts, N3764-5002
.100" x .100" Latch/Ejector, High temperature, 4 wall right angle solder tail, No Latch/Ejector system, Solder tails for .062 [1.57] thick board, 30µ" gold plating.
|
|
|
3M™ 4-Wall Header .100 in., High Temp Option, Right Angle, 64 Contacts, N3764-5002UG
.100" x .100" Latch/Ejector, High temperature, 4 wall right angle solder tail, No Latch/Ejector system, Solder tails for .062 [1.57] thick board, 15µ" gold plating.
|
|
|
3M™ 4-Wall Header .100 in., High Temp Option, Right Angle, 64 Contacts, N3764-5602
.100" x .100" Latch/Ejector, High temperature, 4 wall right angle solder tail, Long Snap-In Latch/Ejectors (3M Part#3505-31) Solder tails for .062 [1.57] thick board, 30µ" gold plating.
|
|
|
3M™ 4-Wall Header .100 in., High Temp Option, Straight, 64 Contacts, 3764 Series, N3764-6502
.100" x .100" Short Roll Pin Latch/Ejectors (3M Part #N3505-30), Tail: .062 (1.57) thick board, 30 micro inch gold plated
|
|
|
3M™ 4-Wall Header .100 in., High Temp Option, Straight, 64 Contacts, 3764 Series, N3764-6602
.100" x .100" Long Roll Pin Latch/Ejectors (3M Part #N3505-31), Tail: .062 (1.57) thick board, 30 micro inch gold plated
|
|
|
3M™ 4-Wall Header .100 in., High Temp Option, Straight, 64 Contacts, 3764 Series, N3764-6603
.100" x .100" Long Roll Pin Latch/Ejectors (3M Part #N3505-31), Tail: solder tails for .094 to .125 (2.39 to 3.18) thick board, 30 micro inch gold plated
|
|
|
3M™ 4-Wall Header .100 in., High Temp Option, Straight, 64 Contacts, 3764-60K2
.100" x .100" Latch/Ejector, Standard, 4 wall straight solder tail, No Latch/Ejector system, Kinked solder tails for .062 [1.57] thick board, 30µ" gold plating.
|
|
|
3M™ 4-Wall Header .100 in., High Temp Option, Straight, 64 Contacts, 3764-6002
.100" x .100" Latch/Ejector, Standard, 4 wall straight solder tail, No Latch/Ejector system, Solder tails for .062 [1.57] thick board, 30µ" gold plating.
|
|
|
3M™ 4-Wall Header .100 in., High Temp Option, Straight, 64 Contacts, 3764-6002UG
.100" x .100" Latch/Ejector, Standard, 4 wall straight solder tail, No Latch/Ejector system, Solder tails for .06 2[1.57] thick board, 15µ" gold plating.
|
|
|
3M™ 4-Wall Header .100 in., High Temp Option, Straight, 64 Contacts, 3764-6003
.100" x .100" Latch/Ejector, Standard, 4 wall straight solder tail, No Latch/Ejector system, Solder tails for .094 to .125 [2.39 to 3.18] thick board, 30µ" gold plating.
|
|
|
3M™ 4-Wall Header .100 in., High Temp Option, Straight, 64 Contacts, 3764-6005
.100" x .100" Latch/Ejector, .240" Pin, .61" Wire-Wrap Tails, 30μ" Gold Plating
|
|
|
3M™ 4-Wall Header .100 in., High Temp Option, Straight, 64 Contacts, 3764-6405
.100" x .100" Latch/Ejector, Standard, 4 wall straight solder tail, Roll Pin Ejectors (3M Part#3505-4), Wrap posts up to 3 levels of wire wrap (normal temp only), 30µ" gold plating.
|
|
|
3M™ 4-Wall Header .100 in., High Temp Option, Straight, 64 Contacts, 3764-6502UG
.100" x .100" Latch/Ejector, Standard, 4 wall straight solder tail, Short Snap-In Latch/Ejectors (3M Part#3505-30), Solder tails for .062 [1.57] thick board, 15µ" gold plating.
|
|
|
3M™ 4-Wall Header .100 in., High Temp Option, Straight, 64 Contacts, 3764-6503UG
.100" x .100" Latch/Ejector Standard, 4 wall straight solder tail, Short Snap-In Latch/Ejectors (3M Part#3505-30), Solder tails for .094 to .125 [2.39 to 3.18] thick board, 15µ" gold plating.
|
|
|
3M™ 4-Wall Header .100 in., High Temp Option, Straight, 64 Contacts, 3764-6602
.100" x .100" Latch/Ejector, Standard, 4 wall straight solder tail, Long Snap-In Latch/Ejectors (3M Part#3505-31) Solder tails for .062 [1.57] thick board, 30µ" gold plating.
|
|
|
3M™ 4-Wall Header .100 in., High Temp Option, Straight, 64 Contacts, 3764-6602UG
.100" x .100" Latch/Ejector Standard, 4 wall straight solder tail, Long Snap-In Latch/Ejectors (3M Part#3505-31) Solder tails for .062 [1.57] thick board, 15µ" gold plating.
|
|
|
3M™ 4-Wall Header .100 in., High Temp Option, Straight, 64 Contacts, 3764-6603
.100" x .100" Latch/Ejector, Standard, 4 wall straight solder tail, Long Snap-In Latch/Ejectors (3M Part#3505-31) Solder tails for .094 to .125 [2.39 to 3.18] thick board, 30µ" gold plating.
|
|
|
3M™ 4-Wall Header .100 in., High Temp Option, Straight, 64 Contacts, 3764-6603UG
.100" x .100" Latch/Ejector, 4 wall straight solder tail, Long Snap-In Latch/Ejectors (3M Part#3505-31) Solder tails for .094 to .125 [2.39 to 3.18] thick board, 15µ" gold plating.
|
|
|
3M™ 4-Wall Header .100 in., High Temp Option, Straight, 64 Contacts, N3764-6002
.100" x .100", no latch/ejector installed, Tail: .062 (1.57) thick board, 30 micro inch gold plated
|
|
|
3M™ 4-Wall Header .100 in., High Temp Option, Straight, 64 Contacts, N3764-6002UG
.100" x .100" Latch/Ejector, High temperature, 4 wall straight solder tail, No Latch/Ejector system, Solder tails for .062 [1.57] thick board, 15µ" gold plating.
|
|
|
3M™ 4-Wall Header .100 in., High Temp Option, Straight, 64 Contacts, N3764-6602UG
.100" x .100" Latch/Ejector, Long Snap-In Latch/Ejectors, 15μ" Gold plating
|
|
|
3M™ 4-Wall Header, 3000 Series, 3764-5002
.100” × .100” Latch/Ejector, Straight and Right Angle
|
|
Printer-friendly format
