3M Electronics Manufacturing : 3M™ 4 Wall, Latch/Ejector Headers, 24 Contacts, 3627 Series

Product Catalog for Electronics Manufacturing 3M™ Telecommunications OEM Center Products for Equipment Manufacturers Products for Routing Equipment Manufacturers Board to Board Connectors Headers 3M™ .100" x .100" Latch/Ejector Header, 4 Wall, 3000 Series

3M™ 4 Wall, Latch/Ejector Headers, 24 Contacts, 3627 Series

[click to enlarge]
24 position 4 Wall, Latch/Ejector Header

Additional Information

Learn More . . .

3M™ .100 in. 4-Wall Hdr.,Latch/Ejector,High Temp Opt.,TS0772 - Data Sheet (PDF 1.1 MB)

Please Note:
Adobe® Acrobat® Reader is required to view PDF documents.

Make a Selection

3M™ 4-Wall Header .100 in., High Temp Option, Right Angle, 24 Contacts, 3627-5002

.100" x .100" Latch/Ejector, Standard, 4 wall right angle solder tail, No Latch/Ejector system, Solder tails for .062[1.57] thick board 30µ" gold plating.

3M™ 4-Wall Header .100 in., High Temp Option, Right Angle, 24 Contacts, 3627-5002UG

.100" x .100" Latch/Ejector, Standard, 4 wall right angle solder tail, No Latch/Ejector system, Solder tails for .062[1.57] thick board 15µ" gold plating.

3M™ 4-Wall Header .100 in., High Temp Option, Right Angle, 24 Contacts, 3627-5003

.100" x .100" Latch/Ejector, Standard, 4 wall right angle solder tail, No Latch/Ejector system, Solder tails for .094 to .125[2.39 to 3.18] thick board, 30µ" gold plating.

3M™ 4-Wall Header .100 in., High Temp Option, Right Angle, 24 Contacts, 3627-5005

.100" x .100" Latch/Ejector, Standard, 4 wall right angle solder tail, No Latch/Ejector system, Wrap posts up to 3 levels of wire wrap (normal temp only), 30µ" gold plating.

3M™ 4-Wall Header .100 in., High Temp Option, Right Angle, 24 Contacts, 3627-5402

.100" x .100" Latch/Ejector, Standard, 4 wall right angle solder tail, Roll Pin Ejectors (3M Part#3505-4), Solder tails for .062[1.57] thick board 30µ" gold plating.

3M™ 4-Wall Header .100 in., High Temp Option, Right Angle, 24 Contacts, 3627-5502

.100" x .100" Latch/Ejector, Standard, 4 wall right angle solder tail, Short Snap-In Latch/Ejectors (3M Part#3505-30), Solder tails for .062[1.57] thick board, 30Âµ" gold plating.

3M™ 4-Wall Header .100 in., High Temp Option, Right Angle, 24 Contacts, 3627-5502UG

.100" x .100" Latch/Ejector, Standard, 4 wall right angle solder tail, Short Snap-In Latch/Ejectors (3M Part#3505-30), Solder tails for .062[1.57] thick board 15µ" gold plating.

3M™ 4-Wall Header .100 in., High Temp Option, Right Angle, 24 Contacts, 3627-5602

.100" x .100" Latch/Ejector, Standard, 4 wall right angle solder tail, Long Snap-In Latch/Ejectors (3M Part#3505-31), Solder tails for .062[1.57] thick board, 30Âµ" gold plating.

3M™ 4-Wall Header .100 in., High Temp Option, Right Angle, 24 Contacts, 3627-5602UG

.100" x .100" Latch/Ejector, Standard, 4 wall right angle solder tail, Long Snap-In Latch/Ejectors (3M Part#3505-31) Solder tails for .062[1.57] thick board, 15Âµ" gold plating.

3M™ 4-Wall Header .100 in., High Temp Option, Right Angle, 24 Contacts, N3627-5002UG

.100" x .100" Latch/Ejector, High temperature, 4 wall right angle solder tail, No Latch/Ejector system, Solder tails for .062[1.57] thick board 15µ" gold plating.

3M™ 4-Wall Header .100 in., High Temp Option, Right Angle, 24 Contacts, N3627-5502

.100" x .100" Latch/Ejector, High temperature, 4 wall right angle solder tail, Short Snap-In Latch/Ejectors (3M Part#3505-30), Solder tails for .062[1.57] thick board 30µ" gold plating.

3M™ 4-Wall Header .100 in., High Temp Option, Right Angle, 24 Contacts, N3627-5503UG

.100" x .100" Latch/Ejector, High temperature, 4 wall right angle solder tail, Short Snap-In Latch/Ejectors (3M Part#3505-30), Solder tails for .094 to .125[2.39 to 3.18] thick board, 15µ" gold plating.

3M™ 4-Wall Header .100 in., High Temp Option, Right Angle, 24 Contacts, N3627-5603UG

.100" x .100" Latch/Ejector, High temperature, 4 wall right angle solder tail, Long Snap-In Latch/Ejectors (3M Part#3505-31) Solder tails for .094 to .125[2.39 to 3.18] thick board, 15µ" gold plating.

3M™ 4-Wall Header .100 in., High Temp Option, Straight, 24 Contacts, 3627 Series, N3627-6603

.100" x .100" Latch/Ejector, Long Roll Pin Latch/Ejectors (3M Part #N3505-31), Solder tails for .094 to .125[2.39 to 3.18] thick board, 30 micro inches gold plated

3M™ 4-Wall Header .100 in., High Temp Option, Straight, 24 Contacts, 3627-6002

.100" x .100" Latch/Ejector, Standard, 4 wall straight solder tail, No Latch/Ejector system, Solder tails for .062[1.57] thick board 30µ" gold plating.

3M™ 4-Wall Header .100 in., High Temp Option, Straight, 24 Contacts, 3627-6002UG

.100" x .100" Latch/Ejector, Standard, 4 wall straight solder tail, No Latch/Ejector system, Solder tails for .062[1.57] thick board, 15Âµ" gold plating.

3M™ 4-Wall Header .100 in., High Temp Option, Straight, 24 Contacts, 3627-6003

.100" x .100" Latch/Ejector, Standard, 4 wall straight solder tail, No Latch/Ejector system, Solder tails for .094 to .125[2.39 to 3.18] thick board, 30µ" gold plating.

3M™ 4-Wall Header .100 in., High Temp Option, Straight, 24 Contacts, 3627-6005

.100" x .100" Latch/Ejector, Standard, 4 wall straight solder tail, No Latch/Ejector system, Wrap posts up to 3 levels of wire wrap (normal temp only), 30µ" gold plating.

3M™ 4-Wall Header .100 in., High Temp Option, Straight, 24 Contacts, 3627-6502

.100" x .100" Latch/Ejector, Standard, 4 wall straight solder tail, Short Snap-In Latch/Ejectors (3M Part#3505-30), Solder tails for .062[1.57] thick board, 30Âµ" gold plating.

3M™ 4-Wall Header .100 in., High Temp Option, Straight, 24 Contacts, 3627-6502UG

.100" x .100" Latch/Ejector, Standard, 4 wall straight solder tail, Short Snap-In Latch/Ejectors (3M Part#3505-30), Solder tails for .062[1.57] thick board, 15Âµ" gold plating.

3M™ 4-Wall Header .100 in., High Temp Option, Straight, 24 Contacts, 3627-6503UG

.100" x .100" Latch/Ejector, Standard, 4 wall straight solder tail, Short Snap-In Latch/Ejectors (3M Part#3505-30), Solder tails for .094 to .125[2.39 to 3.18] thick board, 15Âµ" gold plating.

3M™ 4-Wall Header .100 in., High Temp Option, Straight, 24 Contacts, 3627-6602

.100" x .100" Latch/Ejector, Standard, 4 wall straight solder tail, Long Snap-In Latch/Ejectors (3M Part#3505-31) Solder tails for .062[1.57] thick board, 30Âµ" gold plating.

3M™ 4-Wall Header .100 in., High Temp Option, Straight, 24 Contacts, 3627-6602UG

.100" x .100" Latch/Ejector, Standard, 4 wall straight solder tail, Long Snap-In Latch/Ejectors (3M Part#3505-31) Solder tails for .062[1.57] thick board, 15Âµ" gold plating.

3M™ 4-Wall Header .100 in., High Temp Option, Straight, 24 Contacts, 3627-6603UG

.100" x .100" Latch/Ejector, Standard, 4 wall straight solder tail, Long Snap-In Latch/Ejectors (3M Part#3505-31) Solder tails for .094 to .125[2.39 to 3.18] thick board, 15Âµ" gold plating.

3M™ 4-Wall Header .100 in., High Temp Option, Straight, 24 Contacts, N3627-6002

.100" x .100" Latch/Ejector, High temperature, 4 wall straight solder tail, No Latch/Ejector system, Solder tails for .062[1.57] thick board 30µ" gold plating.

3M™ 4-Wall Header .100 in., High Temp Option, Straight, 24 Contacts, N3627-6002UG

.100" x .100" Latch/Ejector, High temperature, 4 wall straight solder tail, No Latch/Ejector system, Solder tails for .062[1.57] thick board 15µ" gold plating.

3M™ 4-Wall Header .100 in., High Temp Option, Straight, 24 Contacts, N3627-6602

.100" x .100" Latch/Ejector, High temperature, 4 wall straight solder tail, Long Snap-In Latch/Ejectors (3M Part#3505-31) Solder tails for .062[1.57] thick board 30µ" gold plating.

3M™ 4-Wall Header .100 in., High Temp Option, Straight, 24 Contacts, N3627-6602UG

.100" x .100" Latch/Ejector, High temperature, 4 wall straight solder tail, Long Snap-In Latch/Ejectors (3M Part#3505-31) Solder tails for .062[1.57] thick board 15µ" gold plating.

3M™ 4-Wall Header .100, High Temp Option, Right Angle, 24 Contacts, N3627-5002

.100" x .100" Latch/Ejector, No Latch/Ejector system, Solder tails for .062[1.57] thick board, 30Âµ" gold plating.

© 3M 2010 Legal Information Privacy Policy