|
|
 Make a Selection |
|
|
3M™ 3-Wall Header .100 in., 26 Contacts, 3429-1002
.100" x .100" Latch/Ejector, Standard, right angle solder tail, No Latch/Ejector system, Solder tails for .062[1.57] thick board, 30µ" gold plating.
|
|
|
3M™ 3-Wall Header .100 in., 26 Contacts, 3429-1402
.100" x .100" Latch/Ejector, Standard, right angle solder tail, Roll Pin Ejectors (3M Part#3505-4), Solder tails for .062[1.57] thick board, 30µ" gold plating.
|
|
|
3M™ 3-Wall Header .100 in., 26 Contacts, 3429-1403
.100" x .100" Latch/Ejector, Standard, right angle solder tail, Roll Pin Ejectors (3M Part#3505-4), Solder tails for .094 to .125[2.39 to 3.18] thick board, 30µ" gold plating.
|
|
|
3M™ 3-Wall Header .100 in., 26 Contacts, 3429-1502UG
.100" x .100" Latch/Ejector, Standard, right angle solder tail, Short Snap-In Latch/Ejectors (3M Part#3505-30), Solder tails for .062[1.57] thick board, 15µ" gold plating.
|
|
|
3M™ 3-Wall Header .100 in., 26 Contacts, 3429-2002
.100" x .100" Latch/Ejector, Standard, straight solder tail, No Latch/Ejector system, Solder tails for .062[1.57] thick board, 30µ" gold plating.
|
|
|
3M™ 3-Wall Header .100 in., 26 Contacts, 3429-2002UG
.100" x .100" Latch/Ejector, Standard, straight solder tail, No Latch/Ejector system, Solder tails for .062[1.57] thick board, 15µ" gold plating.
|
|
|
3M™ 3-Wall Header .100 in., 26 Contacts, 3429-2003
.100" x .100" Latch/Ejector, Standard, straight solder tail, No Latch/Ejector system, Solder tails for .094 to .125[2.39 to 3.18] thick board, 30µ" gold plating.
|
|
|
3M™ 3-Wall Header .100 in., 26 Contacts, 3429-2003UG
.100" x .100" Latch/Ejector, Standard, straight solder tail, No Latch/Ejector system, Solder tails for .094 to .125[2.39 to 3.18] thick board, 15µ" gold plating.
|
|
|
3M™ 3-Wall Header .100 in., 26 Contacts, 3429-2402
.100" x .100" Latch/Ejector, Standard, straight solder tail, Roll Pin Ejectors (3M Part#3505-4), Solder tails for .062[1.57] thick board, 30µ" gold plating.
|
|
|
3M™ 3-Wall Header .100 in., 26 Contacts, 3429-2403
.100" x .100" Latch/Ejector, Standard, straight solder tail, Roll Pin Ejectors (3M Part#3505-4), Solder tails for .094 to .125[2.39 to 3.18] thick board, 30µ" gold plating.
|
|
|
3M™ 3-Wall Header .100 in., 26 Contacts, 3429-2502UG
.100" x .100" Latch/Ejector, Standard, straight solder tail, Short Snap-In Latch/Ejectors (3M Part#3505-30), Solder tails for .062[1.57] thick board, 15µ" gold plating.
|
|
|
3M™ 3-Wall Header .100 in., 26 Contacts, 3429-2602UG
.100" x .100" Latch/Ejector, Standard, straight solder tail, Long Snap-In Latch/Ejectors (3M Part#3505-31), Solder tails for .062[1.57] thick board, 15µ" gold plating.
|
|
|
3M™ 3-Wall Header .100 in., 26 Contacts, 3429-3005
.100" x .100" Latch/Ejector, Right Angler, .240" Pin, .61" Wire-Wrap Tails, 30u" Gold Plating
|
|
|
3M™ 3-Wall Header .100 in., 26 Contacts, 3429-3005
.100" x .100" Latch/Ejector, Standard, right angle wrap post (normal temp only), No Latch/Ejector system, Wrap posts up to 3 levels of wire wrap (normal temp only), 30µ" gold plating.
|
|
|
3M™ 3-Wall Header .100 in., 26 Contacts, 3429-3405
.100" x .100" Latch/Ejector, Standard, right angle wrap post (normal temp only), Roll Pin Ejectors (3M Part#3505-4), Wrap posts up to 3 levels of wire wrap (normal temp only), 30µ" gold plating.
|
|
|
3M™ 3-Wall Header .100 in., 26 Contacts, N3429-1002UG
.100" x .100" Latch/Ejector, High temperature, right angle solder tail, No Latch/Ejector system, Solder tails for .062[1.57] thick board, 15µ" gold plating.
|
|
|
3M™ 3-Wall Header .100 in., 26 Contacts, N3429-2002UG
.100" x .100" Latch/Ejector, High temperature, straight solder tail, No Latch/Ejector system, Solder tails for .062[1.57] thick board, 15µ" gold plating.
|
|
|
3M™ Three-Wall Header, 3000 Series, 3429-1003
.100” × .100” Latch/Ejector, Straight and Right Angle
|
|
Printer-friendly format
