|
|
 Make a Selection |
|
|
3M™ 3-Wall Header .100 in., 60 Contacts, 3372-1002
.100" x .100" Latch/Ejector, Standard, right angle solder tail, No Latch/Ejector system, Solder tails for .062[1.57] thick board, 30µ" gold plating.
|
|
|
3M™ 3-Wall Header .100 in., 60 Contacts, 3372-1002UG
.100" x .100" Latch/Ejector, Standard, right angle solder tail, No Latch/Ejector system, Solder tails for .062[1.57] thick board, 15µ" gold plating.
|
|
|
3M™ 3-Wall Header .100 in., 60 Contacts, 3372-1003
.100" x .100" Latch/Ejector, Standard, right angle solder tail, No Latch/Ejector system, Solder tails for .094 to .125[2.39 to 3.18] thick board, 30µ" gold plating.
|
|
|
3M™ 3-Wall Header .100 in., 60 Contacts, 3372-2002
.100" x .100" Latch/Ejector, Standard, straight solder tail, No Latch/Ejector system, Solder tails for .062[1.57] thick board, 30µ" gold plating.
|
|
|
3M™ 3-Wall Header .100 in., 60 Contacts, 3372-2002UG
.100" x .100" Latch/Ejector, Standard, straight solder tail, No Latch/Ejector system, Solder tails for .062[1.57] thick board, 15µ" gold plating.
|
|
|
3M™ 3-Wall Header .100 in., 60 Contacts, 3372-2003
.100" x .100" Latch/Ejector, Standard, straight solder tail, No Latch/Ejector system, Solder tails for .094 to .125[2.39 to 3.18] thick board, 30µ" gold plating.
|
|
|
3M™ 3-Wall Header .100 in., 60 Contacts, 3372-3005
.100" x .100" Latch/Ejector, Right Angle Header, .240" Pin, .61" Wire-Wrap Tails, 30u" Gold Plating
|
|
|
3M™ 3-Wall Header .100 in., 60 Contacts, 3372-3005
.100" x .100" Latch/Ejector, Standard, right angle wrap post (normal temp only), No Latch/Ejector system, Wrap posts up to 3 levels of wire wrap (normal temp only), 30µ" gold plating.
|
|
|
3M™ 3-Wall Header .100 in., 60 Contacts, 3372-3405
.100" x .100" Latch/Ejector, Standard, right angle wrap post (normal temp only), Roll Pin Ejectors (3M Part#3505-4), Wrap posts up to 3 levels of wire wrap (normal temp only), 30µ" gold plating.
|
|
|
3M™ 3-Wall Header .100 in., 60 Contacts, 3372-4005
.100" x .100" Latch/Ejector, Straight, .240" Pin, .61" Wire-Wrap Tails, 30u" Gold Plating
|
|
|
3M™ 3-Wall Header .100 in., 60 Contacts, 3372-4405
.100" x .100" Latch/Ejector, Standard, straight wrap post, Roll Pin Ejectors (3M Part#3505-4), Wrap posts up to 3 levels of wire wrap (normal temp only), 30µ" gold plating.
|
|
|
3M™ Latch/Ejector Header .100" X .100, N3372-2002UG
High temperature, 3 wall straight solder tail, No Latch/Ejector system, Solder tails for .062[1.57] thick board, 15µ" gold plating.
|
|
Printer-friendly format
