|
|
 Make a Selection |
|
|
3M™ 3-Wall Header .100 in., 40 Contacts, 3432-1002UG
.100" x .100" Latch/Ejector, Standard, right angle solder tail, No Latch/Ejector system, Solder tails for .062[1.57] thick board, 15µ" gold plating.
|
|
|
3M™ 3-Wall Header .100 in., 40 Contacts, 3432-1002
.100" x .100" Latch/Ejector, Standard, right angle solder tail, No Latch/Ejector system, Solder tails for .062[1.57] thick board, 30µ" gold plating.
|
|
|
3M™ 3-Wall Header .100 in., 40 Contacts, 3432-1003
.100" x .100" Latch/Ejector, Standard, right angle solder tail, No Latch/Ejector system, Solder tails for .094 to .125[2.39 to 3.18] thick board, 30µ" gold plating.
|
|
|
3M™ 3-Wall Header .100 in., 40 Contacts, 3432-1402
.100" x .100" Latch/Ejector, Standard, right angle solder tail, Roll Pin Ejectors (3M Part#3505-4), Solder tails for .062[1.57] thick board, 30µ" gold plating.
|
|
|
3M™ 3-Wall Header .100 in., 40 Contacts, 3432-1403
.100" x .100" Latch/Ejector, Standard, right angle solder tail, Roll Pin Ejectors (3M Part#3505-4), Solder tails for .094 to .125[2.39 to 3.18] thick board, 30µ" gold plating.
|
|
|
3M™ 3-Wall Header .100 in., 40 Contacts, 3432-1502UG
.100" x .100" Latch/Ejector, Standard, right angle solder tail, Short Snap-In Latch/Ejectors (3M Part#3505-30), Solder tails for .062[1.57] thick board, 15µ" gold plating.
|
|
|
3M™ 3-Wall Header .100 in., 40 Contacts, 3432-2002
.100" x .100" Latch/Ejector, Standard, straight solder tail, No Latch/Ejector system, Solder tails for .062[1.57] thick board, 30µ" gold plating.
|
|
|
3M™ 3-Wall Header .100 in., 40 Contacts, 3432-2002UG
.100" x .100" Latch/Ejector, Standard, straight solder tail, No Latch/Ejector system, Solder tails for .062[1.57] thick board, 15µ" gold plating.
|
|
|
3M™ 3-Wall Header .100 in., 40 Contacts, 3432-2003
.100" x .100" Latch/Ejector, Standard, straight solder tail, No Latch/Ejector system, Solder tails for .094 to .125[2.39 to 3.18] thick board, 30µ" gold plating.
|
|
|
3M™ 3-Wall Header .100 in., 40 Contacts, 3432-2402
.100" x .100" Latch/Ejector, Standard, straight solder tail, Roll Pin Ejectors (3M Part#3505-4), Solder tails for .062[1.57] thick board, 30µ" gold plating.
|
|
|
3M™ 3-Wall Header .100 in., 40 Contacts, 3432-3005
.100" x .100" Latch/Ejector, Right Angle, .240" Pin, .61" Wire-Wrap Tails, 30u" Gold Plating
|
|
|
3M™ 3-Wall Header .100 in., 40 Contacts, 3432-4005
.100" x .100" Latch/Ejector, Straight Header, .240" Pin, .61" Wire-Wrap Tails, 30u" Gold Plating
|
|
|
3M™ 3-Wall Header .100 in., 40 Contacts, 3432-4005
.100" x .100" Latch/Ejector, Standard, straight wrap post, No Latch/Ejector system, Wrap posts up to 3 levels of wire wrap (normal temp only), 30µ" gold plating.
|
|
|
3M™ 3-Wall Header .100 in., 40 Contacts, 3432-4405
.100" x .100" Latch/Ejector, Straight Header, Metal Ejectors, .240" Pin, .61" Wire-Wrap Tails, 30u" Gold Plating
|
|
|
3M™ 3-Wall Header .100 in., 40 Contacts, 3432-4405
.100" x .100" Latch/Ejector, Standard, straight wrap post, Roll Pin Ejectors (3M Part#3505-4), Wrap posts up to 3 levels of wire wrap (normal temp only), 30µ" gold plating.
|
|
|
3M™ 3-Wall Header .100 in., 40 Contacts, N3432-1002UG
.100" x .100" Latch/Ejector, High temperature, right angle solder tail, No Latch/Ejector system, Solder tails for .062[1.57] thick board, 15µ" gold plating.
|
|
|
3M™ 3-Wall Header .100 in., 40 Contacts, N3432-1503
.100" x .100" Latch/Ejector, High temperature, right angle solder tail, Short Snap-In Latch/Ejectors (3M Part#3505-30), Solder tails for .094 to .125[2.39 to 3.18] thick board, 30µ" gold plating.
|
|
|
3M™ 3-Wall Header .100 in., 40 Contacts, N3432-2002UG
.100" x .100" Latch/Ejector, High temperature, straight solder tail, No Latch/Ejector system, Solder tails for .062[1.57] thick board, 15µ" gold plating.
|
|
Printer-friendly format
