Learn More . . .
		3M™ .100 in. 4-Wall Hdr.,Latch/Ejector,High Temp Opt.,TS0772 - Data Sheet (PDF 1.1 MB) Please Note: Adobe® Acrobat® Reader is required to view PDF documents.

Make a Selection

3M™ 4-Wall Header .100 in., High Temp Option, Right Angle, 30 Contacts, 3440-5002 .100" x .100" Latch/Ejector, Standard, 4 wall right angle solder tail, No Latch/Ejector system, Solder tails for .062[1.57] thick board 30µ" gold plating.

3M™ 4-Wall Header .100 in., High Temp Option, Right Angle, 30 Contacts, 3440-5002UG .100" x .100" Latch/Ejector, Standard, 4 wall right angle solder tail, No Latch/Ejector system, Solder tails for .062[1.57] thick board 15µ" gold plating.

3M™ 4-Wall Header .100 in., High Temp Option, Right Angle, 30 Contacts, 3440-5003 .100" x .100" Latch/Ejector, Standard, 4 wall right angle solder tail, No Latch/Ejector system, Solder tails for .094 to .125[2.39 to 3.18] thick board, 30µ" gold plating.

3M™ 4-Wall Header .100 in., High Temp Option, Right Angle, 30 Contacts, 3440-5005 .100" x .100" Latch/Ejector, Standard, 4 wall right angle solder tail, No Latch/Ejector system, Wrap posts up to 3 levels of wire wrap (normal temp only), 30µ" gold plating.

3M™ 4-Wall Header .100 in., High Temp Option, Right Angle, 30 Contacts, 3440-5502 .100" x .100" Latch/Ejector, Standard, 4 wall right angle solder tail, Short Snap-In Latch/Ejectors (3M Part#3505-30), Solder tails for .062[1.57] thick board 30µ" gold plating.

3M™ 4-Wall Header .100 in., High Temp Option, Right Angle, 30 Contacts, 3440-5502UG .100" x .100" Latch/Ejector, Standard, 4 wall right angle solder tail, Short Snap-In Latch/Ejectors (3M Part#3505-30), Solder tails for .062[1.57] thick board 15µ" gold plating.

3M™ 4-Wall Header .100 in., High Temp Option, Right Angle, 30 Contacts, 3440-5602 .100" x .100" Latch/Ejector, Standard, 4 wall right angle solder tail, Long Snap-In Latch/Ejectors (3M Part#3505-31) Solder tails for .062[1.57] thick board 30µ" gold plating.

3M™ 4-Wall Header .100 in., High Temp Option, Right Angle, 30 Contacts, 3440-5602UG .100" x .100" Latch/Ejector, Standard, 4 wall right angle solder tail, Long Snap-In Latch/Ejectors (3M Part#3505-31) Solder tails for .062[1.57] thick board 15µ" gold plating.

3M™ 4-Wall Header .100 in., High Temp Option, Right Angle, 30 Contacts, N3440-5002UG .100" x .100" Latch/Ejector, High temperature, 4 wall right angle solder tail, No Latch/Ejector system, Solder tails for .062[1.57] thick board 15µ" gold plating.

3M™ 4-Wall Header .100 in., High Temp Option, Straight, 30 Contacts, 3440-6002 .100" x .100" Latch/Ejector, Standard, 4 wall straight solder tail, No Latch/Ejector system, Solder tails for .062[1.57] thick board 30µ" gold plating.

3M™ 4-Wall Header .100 in., High Temp Option, Straight, 30 Contacts, 3440-6002UG .100" x .100" Latch/Ejector, Standard, 4 wall straight solder tail, No Latch/Ejector system, Solder tails for .062[1.57] thick board 15µ" gold plating.

3M™ 4-Wall Header .100 in., High Temp Option, Straight, 30 Contacts, 3440-6003 .100" x .100" Latch/Ejector, Standard, 4 wall straight solder tail, No Latch/Ejector system, Solder tails for .094 to .125[2.39 to 3.18] thick board, 30µ" gold plating.

3M™ 4-Wall Header .100 in., High Temp Option, Straight, 30 Contacts, 3440-6005 .100" x .100" Latch/Ejector, .240" Pin, .61" Wire-Wrap Tails, 30μ" Gold Plating

3M™ 4-Wall Header .100 in., High Temp Option, Straight, 30 Contacts, 3440-6005 .100" x .100" Latch/Ejector, Standard, 4 wall straight solder tail, No Latch/Ejector system, Wrap posts up to 3 levels of wire wrap (normal temp only), 30µ" gold plating.

3M™ 4-Wall Header .100 in., High Temp Option, Straight, 30 Contacts, 3440-6402 .100" x .100" Latch/Ejector, Standard, 4 wall straight solder tail, Roll Pin Ejectors (3M Part#3505-4), Solder tails for .062[1.57] thick board 30µ" gold plating.

3M™ 4-Wall Header .100 in., High Temp Option, Straight, 30 Contacts, 3440-6502 .100" x .100" Latch/Ejector, Standard, 4 wall straight solder tail, Short Snap-In Latch/Ejectors (3M Part#3505-30), Solder tails for .062[1.57] thick board 30µ" gold plating.

3M™ 4-Wall Header .100 in., High Temp Option, Straight, 30 Contacts, 3440-6502UG .100" x .100" Latch/Ejector, Standard, 4 wall straight solder tail, Short Snap-In Latch/Ejectors (3M Part#3505-30), Solder tails for .062[1.57] thick board 15µ" gold plating.

3M™ 4-Wall Header .100 in., High Temp Option, Straight, 30 Contacts, 3440-6503UG .100" x .100" Latch/Ejector, Standard, 4 wall straight solder tail, Short Snap-In Latch/Ejectors (3M Part#3505-30), Solder tails for .094 to .125[2.39 to 3.18] thick board, 15µ" gold plating.

3M™ 4-Wall Header .100 in., High Temp Option, Straight, 30 Contacts, 3440-6602 .100" x .100" Latch/Ejector, Standard, 4 wall straight solder tail, Long Snap-In Latch/Ejectors (3M Part#3505-31) Solder tails for .062[1.57] thick board 30µ" gold plating.

3M™ 4-Wall Header .100 in., High Temp Option, Straight, 30 Contacts, 3440-6602UG .100" x .100" Latch/Ejector, Standard, 4 wall straight solder tail, Long Snap-In Latch/Ejectors (3M Part#3505-31) Solder tails for .062[1.57] thick board 15µ" gold plating.

3M™ 4-Wall Header .100 in., High Temp Option, Straight, 30 Contacts, 3440-6603UG .100" x .100" Latch/Ejector, Standard, 4 wall straight solder tail, Long Snap-In Latch/Ejectors (3M Part#3505-31) Solder tails for .094 to .125[2.39 to 3.18] thick board, 15µ" gold plating.

3M™ 4-Wall Header .100 in., High Temp Option, Straight, 30 Contacts, N3440-6002 .100" x .100" Latch/Ejector, High temperature, 4 wall straight solder tail, No Latch/Ejector system, Solder tails for .062[1.57] thick board 30µ" gold plating.

3M™ 4-Wall Header .100 in., High Temp Option, Straight, 30 Contacts, N3440-6002UG .100" x .100" Latch/Ejector, High temperature, 4 wall straight solder tail, No Latch/Ejector system, Solder tails for .062[1.57] thick board 15µ" gold plating.

3M™ 4-Wall Header .100 in., High Temp Option, Straight, 30 Contacts, N3440-6602 .100" x .100" Latch/Ejector, High temperature, 4 wall straight solder tail, Long Snap-In Latch/Ejectors (3M Part#3505-31) Solder tails for .062[1.57] thick board 30µ" gold plating.