These 3M™ Adhesive Applicator Hot Melt Series are engineered for 3M™ Jet-melt™ Adhesives.

High performance hot melt adhesive bonds plastics including polyethylene and polypropylene.

These are one-component, high-strength, cyanoacrylate adhesives.

One-component, high-strength, very fast setting, multi-purpose cyanoacrylate adhesive that cures at room temperature with very low pressures.

1357 adhesive is a gray-olive colored, high performance contact adhesive that provides a long bonding range and excellent initial strength.

A versatile line with consistency ranging from heavy liquid to solid sealant tape. Service temperatures range from -40 degrees Celcius/ -40 degrees Farenheit to 121 degrees Celcius/ 250 degrees Farenheit.

These applicators are a fast, practical way to meter, mix and apply two-component adhesives.

This epoxy adhesive is flexible and has a long work life. Both colors are for bonding plastic, metal and other dissimilar materials. The gray color has an eight to 12 hour handling strength, the translucent a 16 to 20 hour handling strength.

This two-part long worklife epoxy adhesive kit contains a 2 oz. Tube of 1838 B/A translucent rigid epoxy. It is a low viscosity epoxy that has excellent environmental resistance and meets MIL-A-23941A. It has an 8 to 12 hour handling strength.

Very clear, fast setting, room temperature curing, two-part adhesive bonding a variety of materials such as metals, ceramics, wood and many plastics in approximately 5 minutes.

Electrical-grade, fast-drying enamel sealer and insulator in a pressurized can. Minimum order case quantity is 12, 16 fl oz cans.

A variety of spray adhesives from repositionable to high tack, high strength. All with a variable spray width, no meth. chloride, 1.1.1.-trich or chlorofluorocarbons.