|
|
 Make a Selection |
|
|
3M™ 3-Wall Header .100 in., 10 Contacts, 3793-1002
.100" x .100" Latch/Ejector, Standard, Right Angle Solder Tail, No Latch/Ejector system, Solder tails for .062[1.57] thick board, 30µ" gold plating.
|
|
|
3M™ 3-Wall Header .100 in., 10 Contacts, 3793-1003
.100" x .100" Latch/Ejector, Standard, right angle solder tail, No Latch/Ejector system, Solder tails for .094 to .125[2.39 to 3.18] thick board, 30µ" gold plating.
|
|
|
3M™ 3-Wall Header .100 in., 10 Contacts, 3793-1502UG
.100" x .100" Latch/Ejector, Standard, right angle solder tail, Short Snap-In Latch/Ejectors (3M Part#3505-30), Solder tails for .062[1.57] thick board, 15µ" gold plating.
|
|
|
3M™ 3-Wall Header .100 in., 10 Contacts, 3793-1602UG
.100" x .100" Latch/Ejector, Standard, right angle solder tail, Long Snap-In Latch/Ejectors (3M Part#3505-31), Solder tails for .062[1.57] thick board, 15µ" gold plating.
|
|
|
3M™ 3-Wall Header .100 in., 10 Contacts, 3793-2002
.100" x .100" Latch/Ejector, Standard, straight solder tail, No Latch/Ejector system, Solder tails for .062[1.57] thick board, 30µ" gold plating.
|
|
|
3M™ 3-Wall Header .100 in., 10 Contacts, 3793-2003
.100" x .100" Latch/Ejector, Standard, straight solder tail, No Latch/Ejector system, Solder tails for .094 to .125[2.39 to 3.18] thick board, 30µ" gold plating.
|
|
|
3M™ 3-Wall Header .100 in., 10 Contacts, 3793-2502UG
.100" x .100" Latch/Ejector, Standard, straight solder tail, Short Snap-In Latch/Ejectors (3M Part#3505-30), Solder tails for .062[1.57] thick board, 15µ" gold plating.
|
|
|
3M™ 3-Wall Header .100 in., 10 Contacts, 3793-2602UG
.100" x .100" Latch/Ejector, Standard, straight solder tail, Long Snap-In Latch/Ejectors (3M Part#3505-31), Solder tails for .062[1.57] thick board, 15µ" gold plating.
|
|
|
3M™ 3-Wall Header .100 in., 10 Contacts, 3793-4005
.100" x .100" Latch/Ejector, Standard, straight wrap post, No Latch/Ejector system, Wrap posts up to 3 levels of wire wrap (normal temp only), 30µ" gold plating.
|
|
|
3M™ 3-Wall Header .100 in., 10 Contacts, 3793-4405
.100" x .100" Latch/Ejector, Standard, straight wrap post, Roll Pin Ejectors (3M Part#3505-4), Wrap posts up to 3 levels of wire wrap (normal temp only), 30µ" gold plating.
|
|
|
3M™ 3-Wall Header .100 in., 10 Contacts, N3793-2602
.100" x .100" Latch/Ejector, High temperature, straight solder tail, Long Snap-In Latch/Ejectors (3M Part#3505-31), Solder tails for .062[1.57] thick board, 30µ" gold plating.
|
|
Printer-friendly format
